Cisco NM-1A-T3 - 1port Ds3 Atm Network Module User Manual page 5

Configuring the Cisco NM-1A-T3/E3 Network Module
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
configure terminal
Example:
Router# configure terminal
Step 3
card type {t3|e3} slot
Example:
Router(config)# card type t3 1
Changing the Card Type
To change the ATM T3/E3 network module for T3 or E3 operation, perform the following tasks:
SUMMARY STEPS
1.
2.
3.
4.
5.
enable
configure terminal
no card type {t3 | e3}
card type {t3 | e3} slot
reload
How to Configure the ATM T3/E3 Network Module
Purpose
Enables privileged EXEC mode.
Enter your password if prompted.
•
Enters global configuration mode.
Specifies T3 or E3 connectivity for the ATM T3/E3 network
module.
Cisco IOS Release 12.4(15)T
5