D-Link DG-102S User Manual page 61

Command Line Interface
TFTP Client Setup Commands
tftp srvip <IP ADDRESS>
Definition:
Example:
tftp get <FILENAME>
Definition:
Example:
tftp update
Definition:
Example:
This command sets the IP address of the TFTP server.
The image must be resident on that TFTP server. If the
IP address is invalid, the message ERROR will be
displayed.
ggdbg>tftp srvip 172.16.6.245
OK
Gets the image from the TFTP server. The <FILENAME>
is the name of the image on the TFTP server. If any error
occurs during the image download, the message
ERROR will be displayed. When the user enters tftp
get, the file name in EEPROM will be employed.
ggdbg>tftp get c:\102nmm.tfp
Download d:\project\dg102\102nmm.tfp ...\
OK
This command updates the image in FLASH. The image
is downloaded for storage in DRAM. If any error occurs
during the image update, the message ERROR will be
displayed.
ggdbg>tftp update
.. Erase Runtime Flash Memory
.. Program Runtime Flash Memory ... Done
OK
... Done
61