D-Link DG-102S User Manual page 15

Using Web-Based Management
Device Information
The items on this window are described below:
Device Type: This displays the model name of this device.
MAC Address: This displays the MAC address of this device.
Boot PROM Version: This displays the version number of the device's
startup code.
Firmware Version: This displays the version number of the device's
runtime code.
DSP Version: This displays the Digital Signal Processor version, if any.
Country Code: This is a user-defined country code for this device.
<0:USA (Default), 1:Japan, 2:Hong Kong, 3:Sweden, 4:China>
Web Port Number: By default the web port number is set to 80. For
more information, contact your service provider.
Life Line Status: Enables or disables the Lifeline function.
Life Line Prefix Digit: This is a user-defined Lifeline prefixed key for
this device (Default is "#" key).
Serial Number: This field is for a user-determined identification number.
System Name: This is a user-defined name for this device.
System Location: This is a user-defined physical location of the device.
System Contact: This is user-defined contact information for the person
or department responsible for the maintenance of this device.
Click on the Save button at the bottom right of the window to save the settings.
15