D-Link DG-102S User Manual page 55

Command Line Interface
General Setup Commands
nwdbg un <USERNAME>
Definition:
Parameter(s):
characters>
Example:
nwdbg pw <PASSWORD>
Definition:
Parameter(s):
characters>
Example:
nwdbg slic <0|1>
Definition:
Parameter(s):
Example:
This command sets the username if there is a username
string, or shows the username/password if only nwdbg
un is typed.
<USERNAME, maximum string length is 12
nwdbg un 123456789012
This command sets the password if there is a
password string, or shows the username/password if
only nwdbg pw is typed.
<PASSWORD, maximum string length is 12
nwdbg pw
This command changes the Subscriber Line Interface
Circuit (SLIC) state to standby or active, or shows the
SLIC state if only nwdbg slic is typed.
<slic state, 0 : standby, 1 : active >
nwdbg slic 0
55