Download Print this page

Advertisement

Advertisement

   Also See for D-Link DG102S

   Related Manuals for D-Link DG102S

   Summary of Contents for D-Link DG102S

  • Page 2: Quick Start Guide

    Quick Start Guide Comwave Home Phone Adapter Important: This guide describes the supported configuration for Comwave Home Phone Service. When calling Comwave’s Technical Support Team, your network must be configured as described. Package Contents Home Phone Adapter Connections 1 Power Adapter 5 Phone 1 2 Serial Cable Used to connect to your telephone...

  • Page 3: Start Here

    Start Here If you have: Cable High Speed Internet DSL High Speed Internet DSL High Speed Internet with without Username and Password Username and Password Go to page 3 Go to page 5 Go to page 3...

  • Page 4

    Installation with a Cable Modem or DSL modem (without USERNAME and PASSWORD) high speed internet modem step steP existing cable or phone line step WAIT!! 2 min. step steP steP telephone power outlet To begin installation, turn off your computer and disconnect the power adapter to step your High speed Internet modem.

  • Page 5

    Connect an ethernet cable from the High speed Internet modem to the step port of the Home Phone adapter. Connect a second ethernet cable from the port of the Home Phone adapter step to your computer. step Connect your telephone handset to the PHONE 1 port of the Home Phone adapter.

  • Page 6

    Installation with a DSL modem (with USERNAME and PASSWORD) high speed internet modem step steP existing phone line step WAIT!! 2 min. step steP steP telephone power outlet To begin installation, turn off your computer and disconnect the power adapter to step your High speed Internet modem.

  • Page 7: Wan Port

    step Connect an ethernet cable from the High speed Internet modem to the port of the Home Phone adapter. step Connect a second ethernet cable from the port of the Home Phone adapter to your computer. step Connect your telephone handset to the PHONE 1 port of the Home Phone adapter.

  • Page 8

    Installation with a DSL modem (with USERNAME and PASSWORD) enter the following User name step and Password, and click “oK”: USER NAME: root PASSWORD: admin step In the left menu, click on “Config IP” and then select “Config device IP address”.

  • Page 9

    In the main window (under the section step called “PPPoe settings”), ensure that the dropdown menu is set to “enabled” . Fill in the User name and Password provided by your Internet service Provider. note: It is important to be very accurate. The user name and password are case sensitive.

  • Page 10

    Installation with a DSL modem (with USERNAME and PASSWORD) In the main window, click on the “save Configuration” button. Your Comwave Home step Phone will reboot.

  • Page 11

    Status The Comwave Home Phone light will blink until it has successfully step connected to the Comwave network. once the Status light stops flashing and becomes solid green, your phone is ready for use. Remember to dial “1” before ALL calls, including local calls (example: 1-416-555-1234). Remember to dial “1”...

  • Page 12

    Features VoiceMail From Home Away from Home Comwave’s Voicemail stores 20 messages and Dial your Comwave Home Phone From your Comwave allows you the flexibility of listening to your number and press * during the Home Phone press messages via phone or email. greeting to enter your mailbox.

  • Page 13: Call Waiting

    Caller ID Call Waiting Comwave’s Caller Id service allows you to see Comwave’s Call waiting service allows you to answer a second incoming call without the identity of the person calling you and they disconnecting your original call. can see your identity when you call them. How it works: How it works: Your telephone number...

  • Page 14

    Have more questions? Call 1-877-474-6638...

Comments to this Manuals

Symbols: 0
Latest comments: