Firmware And Configuration Update - D-Link DG-102S User Manual

Using Web-Based Management

Firmware and Configuration Update

The items on this window are described below:
Software Update Mode: This specifies downloading the image file through
a WAN Link.
TFTP Server Address: The IP address of the TFTP server where the
runtime or configuration file is located. This entry is used only if the
Firmware Update is set to Enable.
Last TFTP Server Address: This is a read-only field that displays the IP
address of the last TFTP server to be accessed.
Firmware Update: Determines whether or not the device will try to look
for a runtime image file on the TFTP server.
File Name: The complete path and filename of the runtime image file on
your TFTP server to be uploaded to the device.
Click on the Save button at the bottom right of the window to save the settings.
Firmware and Configuration Update window
31