D-Link DG-102S User Manual page 43

Voip station gateway
Hide thumbs Also See for DG-102S:
Table of Contents

Advertisement

Configuration Using a Browser
Configuring the VoIP Gateway Using a Web Browser
The items on this window are described below:
Restart Settings
Get IP From: Select the method the VoIP gateway will use to obtain its IP
settings once it is rebooted. Choices include:
Manual: When Manual is selected, the VoIP gateway will obtain its IP
settings from the fields located just below.
BOOTP: When BOOTP is selected, the VoIP will attempt to obtain its
IP settings from a BOOTP server located on your LAN.
DHCP: When DHCP is selected, the VoIP will attempt to obtain its IP
settings from a DCHP server located on your LAN.
IP Address: Enter an IP address for the VoIP gateway.
Subnet Mask: Enter a subnet mask for the VoIP gateway.
Default Gateway: Enter the IP address of the WAN device (usually a
router) you are using to make the WAN connection.
PPPoE Settings (for DSL users)
State: Enables or disables the PPPoE function.
User Name: Enter the User Name for the PPPoE function.
Password: Enter the Password for the PPPoE function.
Click on the Save button at the bottom right of the screen to save the settings.
Next, click on the Config Call Agent IP Address item in the list at the left of the
screen. The following window will appear:
43

Advertisement

Table of Contents
loading

Table of Contents