MGMT 10/100/1000 Ethernet Port
Table 5-2
Signal
GND
RxD
DSR
CTS
MGMT 10/100/1000 Ethernet Port
The MGMT 10/100/1000 Ethernet port is an Ethernet port with an RJ-45 connector. You can use a
modular, RJ-45, straight-through UTP cable to connect the management port to an external hub, switch,
or router.
Table 5-3
Figure 5-2
Table 5-3
Signal
TP0+
TP0-
TP1+
TP2+
TP2-
TP1-
TP3+
TP3-
Gigabit and Fibre Channel Ports
Table 5-4
Table 5-4
Port
Gigabit Ethernet 1000BASE-SX
Table 5-5
Cisco ASA 5500-X Series Hardware Installation Guide
5-4
Cable Pinouts for RJ-45 to DB-9 or DB-25 (continued)
RJ-45 Pin
DB-9 Pin
5
5
6
2
7
6
8
8
lists the cable pinouts for 10/100/1000BASE-T Management Port Cable Pinouts (MDI). (See
for an illustration of the pinouts.)
10/100/1000BASE-T Management Port Cable Pinouts (MDI)
Pin
1
2
3
6
4
5
7
8
lists the types of SFP modules and connectors used in the ASA.
Types of SFP Modules and Connectors
Compliance
1000BASE-LX
lists the SFP port cabling specifications for the SFP modules and connectors used in the ASA.
Appendix 5
Connector
Fiber Type
SW
MMF
LW
SMF
Identifying Cable Pinouts