Cisco ASA5500-HW - Hardware Accessory Kit Network Device Hardware Installation Manual page 45

Chapter 4 Maintenance and Upgrade Procedures
Step 7 Disconnect the blue connector from the board by lifting carefully but firmly. (See
Figure 4-10
Lift the I/O card out of the chassis with both hands by placing an index finger into each of the card cover
Step 8
vents and placing a thumb on the edge of the card cover. (See
and a gentle rocking motion, as the card is firmly seated.
Figure 4-11
1
1
1
2
Removing the Regex Cable Connector
-C- -C- -C- -C-
-B- -B- -B- -B-
-B- -B- -B- -B-
Lift the I/O Card Upward to Release it
Index finger placement
Thumb placement
Installing an I/O Card in the Cisco ASA 5545-X and 5555-X Chassis
-A- -A- -A- -A-
-B- -B- -B- -B-
-A- -A- -A- -A-
-B- -B- -B- -B-
2
2
Cisco ASA 5500-X Series Hardware Installation Guide
Figure
Figure 4-11.) Use firm upward pressure
4-10.)
4-9