Download Print this page

Eclipse AVN 2227P Installation Manual page 6

In-dash portable naigation with cd/usb multi-source receiver
Hide thumbs Also See for AVN 2227P:

Advertisement

Cable colours and connection points for connection cables
Antenna power supply (Blue)
1
Connect to the automatic-antenna control terminal of the vehicle.
Control power supply (Blue/White)
2
Connect the control terminal for the external amplifier, etc.
Cellular phone mute Cable (Pink)
3
Connect to the earth output terminal on a mobile phone.
4
Earth (Black)
Connect where good body earthing is available.
5
Vehicle speed pulse signal cable (Purple/White)
Connect to the vehicle speed pulse signal terminal.
Genuine factory steering remote control terminal
6
Connect to the vehicle steering remote control.
Compatible vehicle models for installation : Vehicles with voltage detection-type steering remote control.
Main unit connections
Front line-out terminals
A
Connect to the RCA connector of an external amplifier.
B
Rear line-out terminals
Connect to the RCA connector of an external amplifier.
C
Line-out terminals (Sub-woofer)
This is used for non fader output. It can be used as a sub-woofer terminal if a separate amplifier with
a low bass filter is connected.
D
E-LAN terminal (13P)
If connecting portable audio equipment, connect an AUX cable (sold separately) to the E-LAN
terminal.
®
iPod
connection terminal
E
Connect to an iPod
F
USB connection terminal
Connect to a USB device such as a flash drive or digital audio player.
- If installing to a vehicle with no ACC position -
Tip
• • If installing to a vehicle with no ACC position, be sure to explain the following to the customer when handing back
the vehicle.
"When getting out of the vehicle, be sure to press the [PWR] button on the main unit for 5 seconds or more
while the power is still on, and then turn off the power." If they forget to turn off the power, the battery will be
drained.
- Vehicle connections -
Tip
• • You will need to purchase the necessary component adapter cable for the vehicle so that the power supplies can
be utilised. (Contact the dealer for further details.)
• • Be sure to wrap the connection cables with plastic tape to insulate them.
Ask your dealer for details.
®
connection cable (sold separately).
- 6 -
and
2
3

Advertisement

loading