Hard Floor Cleaning - Bissell 9500 User Manual

O
peration

Hard floor cleaning

Your ProHeat 2X model may have come with a
hard floor attachment and Hard Floor Solutions
formula. If not, these products are available for
purchase by contacting the BISSELL Consumer
Services department by phone. The hard floor tool
provides effective cleaning for linoleum, vinyl and
tile floors.
Caution: Do not use on unsealed hardwood floors.
1. Vacuum or sweep thoroughly to pick up any
loose debris and pet hair.
2. Move any furniture, if needed.
3. Empty any carpet cleaning formula back into
the BISSELL bottle if stored in the formula
tank. Fill formula tank with BISSELL Hard
Floor Solutions.
4. Fill the 2-in-1 water tank with hand hot tap
water and set aside.
5. Attach the hard floor tool onto the bottom of
the machine by hooking it into the nozzle and
swinging it down until it clicks into place.
6. Check ReadyTools dial. It should be set on
floor cleaning.
7. Set the Custom Clean dial to normal clean.
8. Plug into an outlet and turn the power and
heater switches to the ON ( I ) position.
9. Slowly move the machine forward and back over
hard floor surface one time while pressing
spray trigger.
Caution: Do not overwet.
10. Repeat the motion without pressing the
spray trigger, using the hard floor tool to
squeegee and suction up the dirty water.
11. Allow adequate time for floors to dry.
12. Remove hard floor tool, rinse and dry
before storing.
13. If any formula remains in the formula tank,
pour it back into the Hard Floor Solutions
bottle for use the next time.
.
14 Rinse out the formula tank.
16
w w w . b i s s e l l . c o m
ug120-4042_9500E.indd 16 ug120-4042_9500E.indd 16
WARNING:
To reduce the risk of fire,
electric shock or injury
unplug from outlet before
servicing.
5.
5/7/08 3:37:47 PM 5/7/08 3:37:47 PM