Small Belt Removal And Replacement - Bissell 9500 User Manual

M
aintenance and care

Small belt removal and replacement

Occasional replacement of one or both belts
may become necessary. If that is needed, please
follow the instructions below.
1. Turn off the machine and unplug it from the outlet.
2. Remove both the 2-in-1 water tank and the
formula tank. Set aside.
3. Unscrew the nozzle and remove it. Set aside.
4. Turn the machine on its side.
IMPORTANT: Make sure that the cord
side is down.
5. Remove the clear end cap by unscrewing
the 2 black screws. Take care not to drop
the screws into the unit.
6. Remove 1 silver screw.
7. Remove pivot arm by gently lifting up.
8. Remove small brush belt.
9. Replace small brush belt and reverse
steps above.
w w w . b i s s e l l . c o m
ug120-4042_9500E.indd 21 ug120-4042_9500E.indd 21
2.
3.
4. 5.
6. 7.
8. 9.
21
5/7/08 3:37:48 PM 5/7/08 3:37:48 PM