Cleaning With Hard Floor Sanitize Formula; Emptying The Dirty Water Tank - Bissell CROSSWAVE PREMIER 2304 Series Manual

Cleaning with Hard Floor Sanitize Formula

Visit support.BISSELL.com to watch additional how-to videos.
Please read "DIRECTIONS FOR USE" on Hard Floor Sanitize formula label. Use on hard nonporous
floors only.
1.
Remove visible soil before
cleaning. Hold trigger down to
apply solution on to the floor.

Emptying the Dirty Water Tank

Go to support.BISSELL.com for a full list of how-to videos.
1.
Press the button on top of
the tank, grab the front handle
and pull the tank out.
4.
Pour dirty water down the
sink and rinse the tank.
ATTENTION
rugs. Stalling the brush may result in premature belt failure.
2.
Allow formula to remain wet
on the floor for five minutes.
2.
Hold the top of the tank
near the sides of the filter and
pull up to remove.
Do not overwet carpet or hardwood floors. Be careful not to run over loose objects or edges of area
5m
3.
With the spray trigger
released, make forward and
backward passes to extract
solution.
3.
Remove strainer from tank
and throw debris in trash.
BISSELL.com 7