Kenmore 110.8708 Use & Care Manual page 21

Type of Load Time*
(Minutes)
Foam rubber - pillows, padded bras, stuffed toys 20 - 30
Plastic - Shower curtains, tablecloths 20 - 30
Rubber-backed rugs 40 - 50
Olefin, polypropylene, sheer nylon 10 - 20
*Reset cycle to complete drying, if needed.
When using Air Fluff
• Check that coverings are securely stitched.
• Shake and fluff pillows by hand periodically during the cycle.
• Dry item completely. Foam rubber pillows are slow to dry.
Rack Dry
Rotate the dial to Rack Dry to use this cycle with the drying rack
to dry clothes or items with low heat without tumbling. See
"TUMBLE FREE
TM
Heated Dryer Rack." The temperature setting
is not adjustable with this cycle.
Timed Preset Cycle Settings
Timed Cycles Default Default Time
Load Type Temperature (Minutes)
TIMED DRY High 40
Heavyweight, bulky items,
bedspreads, work clothes
EXPRESS DRY
TM
High 23
Small loads
TOUCH UP Medium High 15
Helps to smooth out
wrinkles
AIR FLUFF Air Dry 36
Dry without heat (no heat)
RACK DRY Low* 30
Dry without tumbling
*Use the Air Fluff cycle for items that require drying without heat
such as rubber, plastic and heat-sensitive fabrics.
You can customize your cycles by selecting options. Not all
Options are available with all cycles. Current selections will glow
green. If an option is unavailable with a selected cycle, the light
will not illuminate when pressed and an error sound will be heard.
WRINKLE GUARD _
WRINKLE GUARD ®helps smooth out wrinkles that form when
you cannot unload the dryer promptly at the end of a cycle.
During this option, the dryer stops tumbling and then tumbles
again for a brief period.
• Press WRINKLE GUARD ®to get up to 21/2hours of heat-free,
periodic tumbling at the end of a cycle.
• Stop WRINKLE GUARD _ at any time by pressing WRINKLE
GUARD ® or opening the dryer door.
• For the Casual cycle, WRINKLE GUARD ®is preset to ON. The
other cycles will retain the WRINKLE GUARD _ setting. For
example, if you select WRINKLE GUARD ® in the Normal
cycle, WRINKLE GUARD _ will be on the next time you select
the Normal cycle.
NOTE: If you do not select WRINKLE GUARD _, the dryer stops
after cool down.
Damp Dry Signal
Select the Damp Dry Signal to alert you that your clothes are
approximately 80% dry. This is useful when you want to remove
lightweight items in a mixed load to avoid overdrying or remove
partially dry items that may need ironing.
The Damp Dry Signal is useful when drying bedsheets/linens in a
mixed load or large items in the "Bulky/Bedding" cycle. When the
signal goes off, open the door to stop the dryer, rearrange the
load inside the dryer, close the door and restart the dryer to finish
the drying cycle. Rearranging the load will aid in the drying
process.
For the "Bulky/Bedding" cycle, the Damp Dry Signal is preset to
ON.
NOTE: The Damp Dry Signal is available only with the Auto
Cycles.
Button Sounds
You can change the volume of the sound of the beeps. Press
BUTTON SOUNDS until the desired volume (Loud, Soft or Off)
glows. The Power and Cancel buttons will still beep softly when
the Button Sounds volume is set to Off.
Drum Light
Press Drum Light to turn on the light inside the dryer drum.
During a cycle, if Drum Light is selected, the drum light turns on
and will remain on until DRUM LIGHT is pressed again, the door
is open and closed, or the door is left open for 5 minutes.
When the dryer is not running, the drum light will turn on when
DRUM LIGHT is pressed or the dryer door is opened, and it will
remain on until the dryer door has been open for 5 minutes, the
dryer door is closed or DRUM LIGHT is pressed again.
Press DRUM LIGHT at any time to turn the drum light ON or OFF.
iiiiiiiii@iiiiiii
Wr nkl_!:
Gt_sd 150
Signal
AUO CYC S OIlY
Bu _,on
So_snds
O
.... IB_umLight
Use Modifiers to select time, temperatures and dryness levels for
the Timed Cycles. Not all Modifiers are available with all options
and cycles. Available modifier settings will glow amber. Current
selections will glow green. If a modifier is unavailable with a
selected cycle, the light will not illuminate.
Time
Press MORE TIME or LESS TIME until the desired drying time is
displayed. The time cannot be changed with Auto Cycles.
21