Removing Accumulated Lint; Vacation Care - Kenmore 11069912990 Owner's Manual And Installation Instructions

REMOVING A CCUMULATED LINT
Toremove a ccumulated lintfrom
exhaust vent:
STEP 1.Disconnect
exhaust vent from
the dryer.
STEP 2. Clean one section of vent at
a time until you reach the exhaust hood.
To clean out lint, you can use the hose
attachment on your vacuum, or use a
pole or wire with a feather duster or rag
attached.
STEP 3. Reconnect vent as described
in the "INSTALLATION INSTRUCTIONS"
of this Owner's Manual.
To remove accumulated lint from
inside the dryer:
Lint should be removed every 2 years, or
more often, depending on dryer usage.
Cleaning should be done by a qualified
person.
MOVING CARE
• Disconnect power.
• Make sure leveling legs are secure
in dryer base.
• Use masking tape to secure dryer door.
VACATION CARE
• Disconnect power.
• Wash lint screen.
41