Kyocera KM-1530 Instruction Handbook Manual page 80

6. Printer Driver for Macintosh
6-3 General Dialog Box
*The actual layout of each dialog box and the available option and settings may differ somewhat depending upon the application and version of
LaserWriter that you are using.
Printer:
Selects the desktop printer to be used for printing your document.
Copies:
Type the desired number of prints to be made (or the number of files to be saved to disk) directly into this field.
Select a number between 1 - 999.
Pages:
To print all of the pages in a file, select the All radio button. To print only certain pages, type in from what page (in the From filed) to what
page (in the To field) you want to print.
Paper Source:
You can select the source of paper feed according to the tray or the desired type of paper. Selection is possible from among the following
items. If you select "Auto Select", the printer will automatically select the tray that contains the most appropriate paper for the job. The
factory default setting is "Auto Select".
Paper type
Tray
* It is necessary to perform the settings under "Page Policy" on page 6-6 BEFORE making settings here. If you want to select the source
of paper feed according to the type of paper, select "Auto Size Select" there. If you want to select the source of paper feed according to
the tray, make sure that "Cassette Base" is selected there. In addition, if you select "Auto Select" here, be sure that the "Page Policy"
setting is set to "Auto Size Select" or there is a possibility that printing will be accomplished onto paper that is difference the expected.
* 20 ppm copier: Tray 3 and Tray 4 are available only when the Option Cassette is installed.
* 15 ppm copier: Tray 2, Tray 3 and Tray 4 are available only when the Option Cassette is installed.
* Selection according to the desired type of paper is NOT available in 15 ppm copiers.
Plain, Transparency, Labels, Recycled, Rough, Letterhead, Color, Envelope,
Card Stock
Auto Select, Tray 1, Tray 2, Tray 3, Tray 4, Bypass Tray
6-4