Kyocera KM-1530 Instruction Handbook Manual page 53

3. Printer Driver for Windows 95/98
3-6 Graphics Tab (KPDL2 Driver)
Resolution:
Specify the desired print resolution. The resolution must be specified in the number of dots per inch (dpi). Select between "600 x 600 dots
per inch (dpi)" and "300 x 300 dots per inch (dpi)". The factory default setting is "600 dots per inch (dpi)".
Halftoning:
Specifies values for the number of line per inch "frequency" and angle of the pattern that you want to use for halftone screens. If you are
getting a more pattern when you print graphics such as photographics or detailed images, you may want to adjust these settings.
However, the default printer settings should work in most cases.
* Do not change these settings unless you have experience using halftones. To return to the default settings after you have made
changes, click Use printer's settings.
Special:
[Print as a negative image] ...... Prints a negative of the image by complementing the RGB values or reversing the black and white
[Print as a mirror image] ........... Prints a mirror image of the your document by reversing the horizontal coordinates. Click this
Scaling:
Specifies the size of the image to print. You can specify from 25% to 400% prints an image four times larger than the original.
values. Click this option to see an example.
option to see an example.
3-8