Kyocera KM-1530 Instruction Handbook Manual page 36

1. Procedure for Installing and Printing with a Printer Driver
1-6 Printing
The following is an example procedure for printing using a printer driver under the conditions and environment noted below.
• OS : Windows 95
• Printer driver : KPDL2 Driver
• Application : Wordpad
• Printing conditions : Print and staple
If you use a system or driver other than that noted above, use the following procedure simply as a reference tool. It is additionally recom-
mended that you read the section corresponding to your operation system as it will contain further explanations specifically regard that OS
and other related drivers.
Making the printer driver settings in Windows
1
Click on [Start] on the Task Bar.
The Start menu will appear.
Use the mouse to point to [Settings] and click on [Printers] in the corresponding
2
submenu.
The [Printers] folder will open.
Use the right mouse button to click on the icon for this printer. A pop-up menu will be
3
displayed.
Select [Properties] from that menu.
The Properties window will appear.
Click on the [Device Options] Tab.
4
Perform the following settings in order to staple your printed sets.
5
"Installable Options" setting
1 Select "Finisher" as the "Output Device" setting.
2 Set the "VM Option" setting to more than 24 MB.
(It is necessary to increase the memory capacity of your printer.)
3 Select "RAM Disk" under "Optional Disk".
Once you have completed these settings, click on [OK].
1-8