Kyocera KM-1530 Instruction Handbook Manual page 52

3. Printer Driver for Windows 95/98
3-5-1 More Paper Options (KPDL2 Driver)
<Only available in the 20 ppm copiers>
Printing on both sides (duplex printing)
Allows you to set the desired duplex mode. The factory default setting is "None".
[None] ......................................... Does not print on both sides.
[Flip on long edge] .................... Prints on both sides and binds along the longer edge.
[Flip on short edge] .................. Prints on both sides and binds along the shorter edge.
* 20 ppm copier: Available only when the optional Duplex Unit is installed.
* 15 ppm copier: Duplex printing is NOT available.
* Paper sizes, types and source of paper feed that are acceptable for duplex printing are as follows:
Paper sizes: Letter (8 1/2" x 11"), Legal (8 1/2" x 14"), Tabloid (11" x 17"), Statement (5 1/2" x 8 1/2"), A3, A4, A5,
Folio (210 mm x 330 mm), JIS B4 and JIS B5
Paper types: Plain, Recycled and Color
Source of paper feed: Any tray EXCEPT the Bypass Tray
3-7