Kyocera KM-1530 Instruction Handbook Manual page 8

1. Printer Settings (15 ppm copier)
Menu
number
KPDL Error Report print out ON/OFF
P31
Sets whether an Error Report will be automatically
printed out whenever a KPDL error occurs.
Auto emulation switching (parallel interface)
P32
Sets the back-up emulation that, depending upon
the type of data received, may be switched to for
printing out when "KPDL (AUTO)" (setting: 7) is
selected under the "Emulation protocol" setting
(menu: P30).
Emulation protocol (network interface)
P35
Sets the emulation protocol that will be used.
Auto emulation switching (network interface)
P37
Sets the back-up emulation that, depending upon
the type of data received, may be switched to for
printing out when "KPDL(AUTO)" (setting: 7) is
selected under the "Emulation protocol" setting
(menu: P30)
Number of copies
P40
Page Protect
P42
If "AUTO" (setting: 1) is selected here, the machine
will monitor the data and, if necessary, will automati-
cally turn Page Protect ON. If a "Print overrun" error
(error code: E80) does happen to occur even then,
the machine will automatically change the Page
Protect setting to "ON" (setting: 2).
Line Feed (LF) handling (parallel interface)
P43
Line Feed (LF) handling (network interface)
P44
Carriage Return (CR) handling (parallel interface)
P45
Carriage Return (CR) handling (network inter-
P46
face)
Item Available settings
(1) On
(2) Off
(1) Line Printer
(2) IBM Proprinter
(3) DIABLO 630
(4) EPSON LQ-850
(5) PCL 6
(1) Line Printer
(2) IBM Proprinter
(3) DIABLO 630
(4) EPSON LQ-850
(5) PCL 6
(6) KPDL
(7) KPDL (AUTO)
(1) Line Printer
(2) IBM Proprinter
(3) DIABLO 630
(4) EPSON LQ-850
(5) PCL 6
001 - 999
(1) Auto
(2) On
(1) LF only
(2) CR and LF
(3) Ignore LF
(1) LF only
(2) CR and LF
(3) Ignore LF
(1) CR only
(2) CR and LF
(3) Ignore CR
(1) CR only
(2) CR and LF
(3) Ignore CR
1-4
Remarks
Available only when the Network
Card is installed.
Available only when the Network
Card is installed.
Available only when the Network
Card is installed.
Available only when the Network
Card is installed.