Kyocera KM-1530 Instruction Handbook Manual page 21

2. Printer Settings (20 ppm copier)
Item No.
Deleting font data
46
Deletes the selected font data from the
Memory Card.
Deleting program data
47
Deletes the selected program data from the
Memory Card.
Deleting macro data
48
Deletes the selected macro data from the
Memory Card.
Formatting the Memory Card
49
If "OK" is selected here, formatting of the
Memory Card will begin.
Partition List print out
50
Duplex mode
51
A4 & Letter usage ON/OFF
52
Allows both A4 and letter size paper to be
utilized as though they are the same size.
Bypass mode
53
If "First" is selected here and there is paper
set in the Multi-Bypass, paper feed will be
accomplished from the Multi-Bypass.
Form feed time-out
54
If "000" seconds is selected here,
successive pages will not be printed until
they are manually force-printed (by selecting
the "GO" command in the printer mode and
then pressing the Enter key).
Item Display message
Delete Font
Delete Program
Delete Macro
Format
List of Partitions
Duplex Mode
Override A4/LT
Bypass Mode
Form Feed Time out
Available settings
Select the name of
the font from among
those displayed.
Select the name of
the partition which
holds the program
from among those
displayed.
Select the name of
the partition which
holds the macro
from among those
displayed.
OK
No, Print
None,
Short edge bind,
Long edge bind
On, Off
Cassette, First
000 - 495 (sec.)
2-11
Remarks
Displayed only when there is
appropriate font data in the
Memory Card.
Displayed only when there is
appropriate program data in the
Memory Card.
Displayed only when there is
appropriate macro data in the
Memory Card.
Displayed only when the Memory
Card is installed.
Displayed only when the Memory
Card is installed.
Displayed only when the Duplex
Unit (option) is installed.