Intel IXM5414E - Blade Server Ethernet Switch Module SBCEGBESW User Manual page 81

Community This field adds an SNMP trap receiver community name and associated IP address.
Name Enter the community string for the SNMP trap packet to be sent to the trap manager.
This may be up to 16 characters and is case sensitive.
IP Address Enter the IP address to receive SNMP traps from this device.
Status This field Enables or Disables the SNMP trap receiver identified by trap receiver
community name and IP address. Enabled trap receivers are active (able to receive
traps). Disabled trap receivers are inactive (not able to receive traps).
Click the Delete button to delete the currently selected Community Name. If you want the switch to
retain the new values across a power cycle, you must perform a save.
Click the Apply button to update the switch with the values on this screen. If you want the switch to
retain the new values across a power cycle, you must perform a save.
Trap receiver summary
This panel displays information about SNMP trap receivers. Trap messages are sent across a
network to an SNMP Network Manager. These messages alert the manager to events occurring
within the switch or on the network. Up to six trap receivers are supported at the same time.
Intel® Blade Server Ethernet Switch Module IXM5414E
71