When Setting An Original On The Original Glass - Konica Minolta bizhub 215 User Manual

6.1 Basic transmission method
6.1.2

When setting an original on the Original Glass

1
Press the Scan key.
The machine switches to the scan mode.
2
Set the original onto the Original Glass.
% For details on how to set the original, refer to [User's Guide Copy Operations].
3
Press Speed Dial and enter a 3-digit speed dial number (the number registered to the target FTP or
SMB server address desired for uploading) using the Keypad.
4
Press OK.
The destination is displayed.
% By pressing ,, the file format and transmission settings for the compression coding method can be
changed. For details, refer to page 6-6.
% Specify the speed dial number to be within the range of [251] to [300].
% An error message will appear if nothing is registered for a specified speed dial number. Enter the
correct speed dial number.
5
Press the Start key.
6
Press +,, then select [AUTO DETECTION] or [MANUAL].
% If [AUTO DETECTION] is selected, press OK and go to Step 9.
% If [MANUAL] is selected, scanning size can be selected. Press ) and go to Step 7.
7
Press +, to select desired scanning size, then press OK.
% By pressing [INCH] or [METRIC], the measuring scanning size can be changed.
8
Press OK.
bizhub 215
6
6-4