Registration Of One-Touch Dial - Konica Minolta bizhub 215 User Manual

4.1 Registering destinations
4.1.1

Registration of One-touch Dial

1
Press the Utility key.
2
Press +,, select [DIAL REGISTRATION], then press OK.
3
Press +,, select [ONE-TOUCH DIAL], then press OK.
4
Press the key to register to a One-touch Dial number.
The registered key number is indicated and the registration setting screen appears.
% Number from 01 to 32 can be registered.
5
Select either [MANUAL SETTING] or [LDAP SEARCH], then press OK.
% If [MANUAL SETTING] is selected, go to Step 6.
% If [LDAP SEARCH] is selected, go to Step 8.
6
Enter the destination name, then press OK.
7
Enter an E-mail address, then press OK.
One-touch Dial is registered.
% When transmitting data over Internet fax, [OTHER SETTING=,] appears when an E-mail address is
entered. Transmission size, resolution, etc. can be set.
For details on the Internet fax, refer to [User's Guide Fax Operations].
8
Select [NAME] or [E-MAIL], then press OK.
9
Enter some of the characters included in the registered name or address to carry out the search, then
press OK.
% You can enter up to 10 characters for a search.
% If an error is made during entry, press Clear/Stop, erase the mistyped character, then re-enter.
% If [BEGIN] is set, the machine searches for the registered name or address starting with the entered
character.
% If [CONTAIN] is set, the machine searches for the registered name or address containing the entered
character or address.
% If [END] is set, the machine searches for the registered name or address ending with the character
or address entered.
The corresponding name or address of the destination will be displayed.
bizhub 215
4
4-3