Checking Communication Results - Konica Minolta bizhub 215 User Manual

5.11

Checking communication results

5.11 Checking communication results
Communication results of scan can be checked.
1
Press the Scan key.
The machine switches to the scan mode.
2
Press the Confirm key.
3
Press +,, then select [TX/RX RESULT].
4
Press OK.
All the transmission results are displayed.
% The transmission results are displayed from the latest result. Press ,, then past communication re-
sults are displayed sequentially.
If Network Card NC-504 or Image Controller IC-209 is installed on this machine, NTP server can be
set. Contents of displayed communication results differ depending on whether or not the NTP server
has been specified.
When the NTP server is set:
Data transmitted by Scan to E-mail or Scan to Server will have a transmission number and date dis-
played.
When the NTP server is not set:
Data transmitted by Scan to E-mail or Scan to Server will only have a transmission number displayed,
not a date.
5
Press OK.
The screen returns to the Scan screen.
bizhub 215
5
5-19