Registering Ftp/Smb Server Address - Konica Minolta bizhub 215 User Manual

4.1 Registering destinations
7
Enter an E-mail address, then press OK.
Speed dial number is registered.
% When transmitting data over Internet fax, [OTHER SETTING=,] appears when an E-mail address is
entered. Transmission size, resolution, etc. can be set.
For details on the Internet fax, refer to [User's Guide Fax Operations].
8
Select [NAME] or [E-MAIL], then press OK.
9
Enter some of the characters included in the registered name or address to carry out the search, then
press OK.
% You can enter up to 10 characters for a search.
% If an error is made during entry, press Clear/Stop, erase the mistyped character, then re-enter.
% If [BEGIN] is set, the machine searches for the registered name or address starting with the entered
character.
% If [CONTAIN] is set, the machine searches for the registered name or address containing the entered
character or address.
% If [END] is set, the machine searches for the registered name or address ending with the character
or address entered.
The corresponding name or address of the destination will be displayed.
10
Press +,, select the registered name or address from the search results, then press OK.
% Press ), then the machine indicates the name and E-mail address. Check them, and press OK. If a
selection error is made, press Back. Displays the previous screen.
% If the searched E-mail address contains more than 64 characters, the screen returns to the address
registration screen.
11
Check the destination name, then press OK.
12
Check the E-mail address, then press OK.
Speed dial number is registered.
% When transmitting using the Internet fax, press , and the transmission size and resolution can be
set up.
For details on the Internet fax, refer to [User's Guide Fax Operations].

Registering FTP/SMB Server address

Registers FTP/SMB server address for transmitting the scanned data to FTP/SMB server to a speed dial
number between [251] and [300] from [PageScope Web Connection].
d
Reference
To register an FTP/SMB server address to the speed dial number, the user will have to access PageScope
WebConnection in Administrator mode.
For details on accessing PageScope Web Connection in Administrator mode, refer to PageScope Web
Connection in [User's Guide Network Administrator].
For registration of the FTP/SMB server address to the speed dial number, refer to PageScope Web Con-
nection - [Address] tab - [Speed Dial Setting] in [User's Guide Network Administrator].
bizhub 215
4
4-5