[Document Size]; [Scan Mode]; [Resolution] - Konica Minolta bizhub 215 User Manual

3.2 TWAIN driver
No. Item
5 [Duplex Scanning]
6 [Scanning mode]
7 [Image size]
8 [Brightness/Contrast,
Sharp , Curves, Level,
Color Balance, Hue/Sat-
uration, Default]
9 [LAN/USB]
10 [About]
11 [Scan]
12 [Close]
13 [Clear]
14 [Prescan]
15 [Help]
16 [Unit]

[Document Size]

Specify the size of original to be scanned.
Tips
- If the target image for scanning is larger than the size specified by the Manuscript, the portion exceed-
ing the specified size will be deleted.
- If the target image for scanning is smaller than the size specified by the Manuscript, the image is
scanned to the specified size.

[Scan Mode]

Select the image quality of the original.
- [Full Color]: Appropriate for color copying.
- [Grey]: Appropriate for monochromatic copying.
- [B/W (Photo)]: Appropriate for photography.
- [Text]: Appropriate for documentation in general.

[Resolution]

Specify the print resolution.
If [Scan Mode] is set to [Full Color] or [Gray], [600 dpi e 600 dpi] is not displayed.
- [150 dpi e 150 dpi]: Resolution good for standard character size. The resolution supports efficient scan-
ning.
- [300 dpi e 300 dpi]: Resolution good for small character size. An initial setting is made for this resolution.
- [600 dpi e 600 dpi]: High resolutions appropriate for landscapes and images of people.
bizhub 215
Settings
The screen indicates that the optional ADF is installed.
[OFF], [ON]
For details, refer to page 3-8.
Select scan setting for [Auto] or [Manual].
Image capacity is indicated.
For details, refer to page 3-5.
While in [Scanning Mode], this is indicated if [Manual] is selected.
For details, refer to page 3-6.
You can verify or change USB and network connection setting.
For details, refer to page 3-5.
Displays printer driver version information.
For details, refer to page 3-5.
Scans the image.
For details, refer to page 3-5.
Stops scanning.
For details, refer to page 3-5.
Deletes pre-scan images.
For details, refer to page 3-5.
Pre-scans and displays the image.
For details, refer to page 3-5.
Displays Help file.
For details, refer to page 3-5.
[in], [cm], [pixel]
For details, refer to page 3-5.
3
3-4