5.4
Changing the setting for scanned original density
5.4
Changing the setting for scanned original density
The setting for the scan quality of the original can be changed in the screen used to set density.
5.4.1
Test/Photo, Text mode setting
This indicates the setting procedure in the image quality setting when [TEXT/PHOTO] or [TEXT] is set.
1
Press the Scan key.
The machine switches to the scan mode.
2
Press the Density key.
A screen used to set density appears.
3
Specify desired density.
% If [Color Setting] for [Quality] is set to [BW], press +,, and select either [AUTO] or [MANUAL].
% If the image quality of original type is either [TEXT/PHOTO] or [TEXT], select [AUTO] or [MANUAL].
For Auto setting, select [AUTO], then press OK. For the manual setting, select [MANUAL], press *
or ), then press OK.
% If [Color Setting] for [Quality] is set to [Gray] or [Color], [AUTO] is not displayed. The gray setting can
only be made using [MANUAL].
% When setting manually, pressing * reduces density. Pressing ) increases density.
% When OK is pressed after density is adjusted, the scan screen will display a density corresponding
to the adjusted density.
Tips
-
The factory default is [AUTO].
5.4.2
Setting of Photo mode
This describes the image quality setting when [PHOTO] is set.
1
Press the Scan key.
The machine switches to the scan mode.
2
Press the Density key.
3
Press * or ) to adjust density.
% Pressing * reduces density. Pressing ) increases density.
bizhub 215
5
5-9