Connecting The Printer Cable; Installing The Printing System Software - Kyocera Ai4040 Instruction Handbook Manual

(3) Connecting the printer cable

1 1
Caution
ALWAYS turn the printer and the computer OFF before connecting the printer
cable.
Turn the main switch, located on the left side of the printer, OFF (O).
* When this unit is used as a local printer, turn the power to the Server OFF as
well.
Connect the printer cable to the printer cable connector located on the right side of
2 2
the printer.
* When this unit is used as a local printer, use the printer cable that is included
with this product. The printer cable should always be a 10Base-T or 100Base-TX
cable.
Turn the main switch to the printer back ON ( | ).
3 3
* When this unit is used as a local printer, turn the power to the Server back ON as
well.

(4) Installing the Printing System software

Carry out the following procedure to install the Printing System software that is
appropriate to the operating system that is in use on your computer.
The following Printing System software is available with this product.
• Printer Driver PCL for Windows 95
• Printer Driver PS for Windows 95
• Printer Driver PCL for Windows NT 4.0
• Printer Driver PS for Windows NT 4.0
• PPD files for Mac OS
• Status Monitor for Windows 95 / Windows NT 4.0
• Server Software
Refer to the corresponding section for the appropriate installation procedure for
each software package.
Preparation
4