Broadcasting To Servers; Figure 3.22: Diag Warning Window - IBM 17353LX - 1x8 Console Switch Installation And User Manual

48 IBM Rack Console Switch Installation and User's Guide

Figure 3.22: Diag Warning window

3. Click OK to begin diagnostics.
-or-
Click X or press Esc to exit the window without running a diagnostic test.
All users are disconnected during diagnostics, and the Diagnostics window displays.
4. As each test is finished, a pass (green circle) or fail (red x) symbol displays. The test is com-
plete when the last test's symbol displays.

Broadcasting to Servers

A user can simultaneously control more than one server in a system, to make sure that all selected
servers receive identical input. You can choose to broadcast movements of keystrokes and mouse
movements independently. You can broadcast to up to 16 servers at a time, one server per ARI
port.
Accessing the Broadcast window
1. Access the Setup window. If needed, see "Accessing the Setup window" on page 30.
2. Click Broadcast. The Broadcast window opens.