Broadcasting To Servers; Figure 3.15: Commands Window - IBM 09N4290 User Manual

34 IBM Console Switch Installation and User's Guide

Figure 3.15: Commands Window

3. Select Scan Enable in the Commands window.
4. Click X to close the Commands window.
NOTE: Scanning will begin when the Main window or flag is displayed. Scanning is not permitted in any other
OSCAR interface window.
Canceling scan mode
1. Select a server if the OSCAR interface is open.
-or-
Move the mouse or press any key on the keyboard if the OSCAR interface is not open.
Scanning will stop at the currently selected server.
-or-
Press Print Screen. The Main window opens.
2. Click Commands. The Commands window opens.
3. Clear the Scan Enable check box.

Broadcasting to Servers

The local user can simultaneously control more than one server in a system, to make sure that all
selected servers receive identical input. You can choose to broadcast movements of keystrokes and
mouse movements independently. You can broadcast to up to 16 servers at a time, one server per
ARI port.
Accessing the Broadcast window
1. Press Print Screen. The Main window opens.
2. Click Setup Broadcast. The Broadcast window opens.
-