Figure 3.21: Diagnostics Window; Table 3.6: Diagnostic Test Details - IBM 17353LX - 1x8 Console Switch Installation And User Manual

Figure 3.21: Diagnostics window

A pass (green circle) or fail (red x) symbol displays to the left of each test as the test completes.
The following table details each of the tests.

Table 3.6: Diagnostic test details

Test
Memory Tests
Firmware CRCs
Comm Interfaces
Switch Controller test
Local Video
On-line Targets
Offline Targets
Suspect Targets
Running diagnostic tests
1. Access the Commands window. If needed, see "Accessing the Commands window" on
page 40,
2. Click Run Diagnostics. A Diag Warning message opens to indicate that all users are discon-
nected.
Description
Reports on the condition of the main board RAM
Reports on the condition of the main board RAM
Validates the current firmware images stored in the system's Flash
Verifies the switch matrix controller is accessible and functional
Indicates the condition of the local video monitor
Indicates the total number of currently connected and powered targets
Indicates the number of targets that have been connected successfully in the
past and are powered down
Indicates the number of targets that have been detected, but are either unavail-
able for connection or have dropped packets during the ping tests
Chapter 3: Using the OSCAR Interface 47