Outputs From Pre-Design Activities; Section 2.6, "Outputs From Pre-Design Activities - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - SYSTEM PLANNING-DEPLOYMENT-BEST PRACTICES GUIDE 10.3 30-03-2010 System Planning Manual

2.6 Outputs from Pre-Design Activities

As mentioned in Section 2.4, "Develop High-Level Design," on page
(or deliverables) from your pre-design activities:
Assessment document: This document highlights all of your findings from the business and
technical assessments that you perform. The document is the foundation for performing your
design activities, and needs to be kept up to date. The document includes information such as:
Requirements gathered during meetings and workshops with department leaders and
others inside the organization that will have an influence on the services ZENworks
Configuration Management will deliver.
A detailed summary of your technical findings, and what needs to change in order to
support ZENworks Configuration Management in the infrastructure. Suggestions should
include best practices and detailed recommendations to resolve any known issues.
High-level design information, including general placement of services and other
infrastructure components.
High-level graphical design diagram: This diagram is used to visually understand what the
infrastructure will look like after the deployment is complete. This is a foundational document,
and it should be further refined during the design phase of your project.
18, there are two main outputs
Performing Pre-Design Activities 19