Configuring Zenworks Appliance - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - ZENWORKS APPLIANCE DEPLOYMENT AND ADMINISTRATION REFERENCE 10.3 16-04-2010 Deployment Manual

3 (Optional) Take a snapshot of the virtual machine that you created in
4 Power on the virtual machine on which you imported the ZENworks Appliance image.
The Configuration Wizard is launched automatically.
5 Continue with

3.2 Configuring ZENworks Appliance

After importing the ZENworks Appliance image to your virtual machine, review the following
sections to configure ZENworks Appliance:
Section 3.2.1, "Configuring the Preinstalled SLES 10 SP2," on page 15
Section 3.2.2, "Configuring the Preinstalled ZENworks Server," on page 16
Section 3.2.3, "Configuration Information for ZENworks 10 Configuration Management on
ZENworks Appliance," on page 18
Section 3.2.4, "Configuring the Preinstalled ZENworks Reporting Server," on page 23
After ZENworks Appliance is configured, you can log in to ZENworks Appliance and use the
ZENworks Control Center management console to access the ZENworks 10 Configuration
Management capabilities. For more information, see
10 Configuration Management Enterprise Edition Getting Started
14 ZENworks 10 Configuration Management Appliance Deployment and Administration Reference
Section 3.2, "Configuring ZENworks Appliance," on page
Step
"Management Capabilities" in the
Guide.
2.
14.
ZENworks