Password - Novell PLATESPIN ORCHESTRATE 2.0.2 - COMMAND LINE REFERENCE 06-17-2009 Reference
Command line reference
Hide thumbs
Also See for PLATESPIN ORCHESTRATE 2.0.2 - COMMAND LINE REFERENCE 06-17-2009:
- Client manual (164 pages) ,
- Reference (32 pages) ,
- Getting started (24 pages)
Table of Contents
Advertisement
password
This command lets the user change his or her password on the current Orchestrate Server.
Syntax
zos password [--passwd=] [--newpasswd=]
Options
-p, --passwd=<value>
Current password for authentication. The user must enter a value with this option.
-n, --newpasswd=<value>
New password for authentication. The user must enter a value with this option.
-C, --cols=<value>
Specifies the terminal width for formatting. The user must enter a value with this option.
-h, --help
Displays a help message for this operation.
-d, --debug
Turns on debug output during the logout operation.
-v, --verbose
Turns on verbose output during the logout operation.
-z, --tls=<value>
Force TLS/SSL encryption [on|off]. The user must enter a value with this option.
-Z, --tlsPort=<value>
Port number for TLS/SSL connections. The user must enter a value with this option.
-y, --tlsYesNew
Force acceptance of new TLS server certificates.
-Y, --tlsYesAll
Force acceptance of all TLS server certificates.
44
PlateSpin Orchestrate 2.0 Command Line Reference
Advertisement
Table of Contents
Need help?
Do you have a question about the PLATESPIN ORCHESTRATE 2.0.2 - COMMAND LINE REFERENCE 06-17-2009 and is the answer not in the manual?
Questions and answers