Deploy - Novell PLATESPIN ORCHESTRATE 2.0.2 - COMMAND LINE REFERENCE 06-17-2009 Reference

deploy

This command deploys a new component onto a server.
Syntax
Enter the command using the syntax shown below. Available options are shown in brackets.
zosadmin deploy [--port=] file|dir
Arguments
file|dir
Specify the deployable file or a directory containing deployable files.
Options
When you add an option, use the syntax in the command line as shown above (where options are
shown in their long form). Short and long options for this command are listed below.
-v, --verbose
Turn on verbose output during this operation.
-V, --debug
Turn on debug output during this operation.
-h, --help
Display a help message for this operation.
Examples
Example 1
To deploy the service file
zosadmin deploy myservice.sar
Example 2
To deploy the job file
quickie.job
zosadmin deploy quickie.job
Example 3
To deploy a job file in the
zosadmin deploy /test/myjob.job
, use the following command:
myservice.sar
, use the following command:
directory, use the following command:
/test/myjob.job
The zosadmin Command Line Tool 73