Novell PLATESPIN ORCHESTRATE 2.0.2 - COMMAND LINE REFERENCE 06-17-2009 Reference page 51

-C, --cols=<value>
Specifies the terminal width for formatting. The user must enter a value with this option.
-h, --help
Displays a help message for this operation.
-d, --debug
Turns on debug output during this operation.
-v, --verbose
Turns on verbose output during this operation.
-z, --tls=<value>
Force TLS/SSL encryption [on|off]. The user must enter a value with this option.
-Z, --tlsPort=<value>
Port number for TLS/SSL connections. The user must enter a value with this option.
-y, --tlsYesNew
Force acceptance of new TLS server certificates.
-Y, --tlsYesAll
Force acceptance of all TLS server certificates.
Examples
Example 1
To run the job called unittest with the highest priority and another parameter, the user would use the
following command:
zos run unittest --priority=highest testno=test57
Example 2
To run the job called unittest passing the PATH environment variable only, the user would use the
following command:
zos run unittest --env=PATH
Example 3
To run the job called unittest passing a local policy file, the user would use the following command:
zos run unittest --policyfile=/tmp/mypolicy.policy
Example 4
To run the job called unittest at 5:01 p.m., the user would use the following command:
zos run unittest --start="5:01 PM"
The zos Command Line Tool 51