Priority - Novell PLATESPIN ORCHESTRATE 2.0.2 - COMMAND LINE REFERENCE 06-17-2009 Reference

priority

This command changes the priority of a running job.
Syntax
zos priority [jobid] [--priority=]
Arguments
jobid
The user must enter the jobid that he or she is interested in. The default for this argument is the
last job run.
Options
-r, --priority=<value>
Specifies the priority level for job. The user must enter a value with this option.
-C, --cols=<value>
Specifies the terminal width for formatting. The user must enter a value with this option.
-h, --help
Displays a help message for this operation.
-d, --debug
Turns on debug output during this operation.
-v, --verbose
Turns on verbose output during this operation.
-z, --tls=<value>
Force TLS/SSL encryption [on|off]. The user must enter a value with this option.
-Z, --tlsPort=<value>
Port number for TLS/SSL connections. The user must enter a value with this option.
-y, --tlsYesNew
Force acceptance of new TLS server certificates.
-Y, --tlsYesAll
Force acceptance of all TLS server certificates.
Examples
Example 1
To change the current job's priority to , the user would enter the following command:
lowest
The zos Command Line Tool 47