Undeploy - Novell PLATESPIN ORCHESTRATE 2.0.2 - COMMAND LINE REFERENCE 06-17-2009 Reference

undeploy

This command undeploys a component from the server.
Syntax
Enter the command using the syntax shown below. Available options are shown in brackets.
zosadmin undeploy [--session=] component|dir
Arguments
component|dir
Specify the deployed file or a directory containing the deployed files.
Options
When you add an option, use the syntax in the command line as shown above (where options are
shown in their long form). Short and long options for this command are listed below.
-i, --session <value>
Specify the deployment session ID.
-v, --verbose
Turn on verbose output during this operation.
-V, --debug
Turn on debug output during this operation.
-h, --help
Display a help message for this operation.
Examples
Example 1
To undeploy the service
zosadmin undeploy myservice.sar
Example 2
To undeploy the job file
zosadmin undeploy quickie.job
Example 3
To undeploy the job files in directory
zosadmin undeploy /test/myjob.job
94 PlateSpin Orchestrate 2.0 Command Line Reference
, use the following command:
myservice.sar
from the server, use the following command:
quickie.job
/test/myjob.job
, use the following command: