Create - Novell PLATESPIN ORCHESTRATE 2.0.2 - COMMAND LINE REFERENCE 06-17-2009 Reference

create

This command creates a new server instance.
Syntax
Enter the command using the syntax shown below. Available options are shown in brackets.
zosadmin create [--newdir=] [--upgrade=] [--profile=] [--id=] [--grid=] [--
user=] [--passwd=] [--rmiport=] [--rmihost=] [--httpport=] [--adminport=] [--
agentport=] [--auditurl=] [--audituser=] [--auditpasswd=] [--cert=] [--key=]
[<hostname>]
Arguments
hostname
Specify the hostname to use for this server. The default is the system hostname.
Options
When you add an option, use the syntax in the command line as shown above (where options are
shown in their long form). Short and long options for this command are listed below.
-N, --newdir <value>
The location where the new Orchestrate Server should be installed.
-G, --upgrade
Switch the upgrade behavior for snapshot handling.
-e, --profile <value>
Create a new instance based on named profile (the default is
-i, --id <value>
Select by kernel ID.
-g, --grid <value>
Select by grid name.
-C, --clusterhost <value>
Hostname of virtual cluster IP resource (for High Availability configuration).
-u, --user <value>
Username used in accessing secure remote sites.
-p, --password <value>
Password used in accessing secure remote sites.
-P, rmiport <value>
Select by RMI port.
70 PlateSpin Orchestrate 2.0 Command Line Reference
).
server