Start - Novell PLATESPIN ORCHESTRATE 2.0.2 - COMMAND LINE REFERENCE 06-17-2009 Reference

start

This command starts a local server.
Syntax
Enter the command using the syntax shown below. Available options are shown in brackets.
zosadmin start [--dir=] [--jvmargs=] [--javaargs=] [--timeout=] [--upgrade] [-
-snapshot=]
Options
When you add an option, use the syntax in the command line as shown above (where options are
shown in their long form). Short and long options for this command are listed below.
-d, --dir <value>
Specify the working directory for a PlateSpin Orchestrate installation.
-b, --jvmargs <value>
Pass the value as an argument to an invoked JVM process.
-B, --javaargs <value>
Pass the value as an argument to an invoked Java program.
-t, --timeout <value>
Specify the query timeout (in seconds).
-G, --upgrade
Switch upgrade behavior for snapshot handling.
-S, --snapshot=
Upgrade a server using the snapshot directory of an existing server.
-V, --debug
Turn on debug output during this operation.
-v, --verbose
Turn on verbose output during this operation.
-h, --help
Display a help message for this operation.
Examples
Example 1
To start a server instance using the install directory (default), use the following command:
zosadmin start
90 PlateSpin Orchestrate 2.0 Command Line Reference