Novell PLATESPIN ORCHESTRATE 2.0.2 - COMMAND LINE REFERENCE 06-17-2009 Reference page 58

-R, refresh=<value>
Server connection refresh rate. The user must enter a value with this option.
-X, --count=<value>
Maximum number of lines/bytes to display.
-t, --timeout=<value>
The maximum number of seconds to follow a file.
-q, --quiet
Suppress all warning and informational messages.
-C, --cols=<value>
Specifies the terminal width for formatting. The user must enter a value with this option.
-h, --help
Displays a help message for this operation.
-d, --debug
Turns on debug output during this operation.
-v, --verbose
Turns on verbose output during this operation.
-z, --tls=<value>
Force TLS/SSL encryption [on|off]. The user must enter a value with this option.
-Z, --tlsPort=<value>
Port number for TLS/SSL connections. The user must enter a value with this option.
-y, --tlsYesNew
Force acceptance of new TLS server certificates.
-Y, --tlsYesAll
Force acceptance of all TLS server certificates.
Examples
Example 1
To display the last 5 lines of
zos tail -n 5 grid:///!benchmark/benchmark.jdl
Example 2
To display the last 5 lines of
command:
zos tail -5 grid:///!benchmark/benchmark.jdl
58 PlateSpin Orchestrate 2.0 Command Line Reference
grid:///!benchmark.jdl
grid:///!benchmark.jdl
, use the following command:
in an alternative way, use the following