Getting Started; Installing Novell Workgroup Suite Small Business Edition; Beginning The Installation; Chapter 2, "Getting Started - Novell OPEN WORKGROUP SUITE SMALL BUSINESS EDITION 2.0 - INSTALLATION AND ADMINISTRATION GUIDE 5-02-2008 Administration Manual

Table of Contents

Advertisement

Getting Started

2
Section 2.1, "Installing Novell Workgroup Suite Small Business Edition," on page 19
Section 2.2, "Administering the Novell Open Workgroup Suite Small Business Edition," on
page 22
Section 2.3, "Configuring Components," on page 24
2.1 Installing Novell Workgroup Suite Small
Business Edition
Verify that you have one disk with the Novell
installation files, or download the installation ISO from http://www.download.novell.com to a
location of your choice and burn it to a DVD. The download is 5 GB and takes a moment to
complete.
If you use a VMware* or other virtualized environment session instead of a physical server, make
sure to designate the boot sequence to boot from the CD-ROM.
Section 2.1.1, "Beginning the Installation," on page 19
Section 2.1.2, "Web Installation and Configuration," on page 20
Section 2.1.3, "Configuration and Basic Administration," on page 21

2.1.1 Beginning the Installation

1 Insert the NOWS SBE DVD into the DVD drive.
2 Boot the server. You are presented with a splash screen. Using the Down-arrow key, select
Installation, then press Enter.
3 The first page is the End User License Agreement (EULA). Read through the agreement and
click I Agree to advance to the next page.
4 After the initial files have been loaded into the system, you are prompted to set up the initial
configuration of your server on the Installation Settings window. You now have the following
two options:
If you do not want to change any of the settings and choose to keep the defaults, just click
Accept in the lower right corner of the window. A Confirm Installation message appears; if
you are satisfied with the default, click Install.
If you want to change any of the settings, click Change and select the setting you want to
modify. Repeat this task until all changes are complete. If you are satisfied with your
changes, click Accept in the lower right corner of the Installation Settings main window. A
Confirm Installation message appears; if you are satisfied with your changes, click
Install.
IMPORTANT: Do not change the configurations for the Software settings. Doing so causes
your install to fail.
®
Open Workgroup Suite Small Business Edition 2.0
2
Getting Started
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Open workgroup suite small business edition 2.0

Table of Contents