Installing Edirectory Advanced - Remote Tree - Novell OPEN WORKGROUP SUITE SMALL BUSINESS EDITION 2.0 - INSTALLATION AND ADMINISTRATION GUIDE 5-02-2008 Administration Manual

9 Specify NCP settings if you want to enable access to NCP volumes via the Novell Client or
10 Review the settings. To make changes, edit the XMPL text directly to specify additional
11 The Advanced eDirectory - Existing Tree install is complete. Click Finish to return to the

3.4 Installing eDirectory Advanced - Remote Tree

1 In the Components panel of the NOWS SBE administration page, click Add/Remove, then click
2 A Recommended Components page appears. Read it and click Continue.
3 To proceed with the Advanced installation, click Advanced - Use Remote Tree, then click Next.
4 Specify existing tree information.
5 Specify the organization name.
6 Specify your administrative user information. Do not use special characters when specifying
7 Specify LDAP settings. Do not use special characters, except for hyphens, when specifying the
8 Review the settings. To make changes, edit the XMPL text directly to specify additional
9 The Advanced eDirectory - Remote Tree install is now complete. Click Finish to return to the
28 Novell Open Workgroup Suite Small Business Edition 2.0 Administration and Installation Guide
other NCP aware utilities.
NCP Support: Enables NCP support on top native Linux file systems (not NSS)
Name for Default NCP Volume: If NCP support is enabled, a volume with this name is
created.
NCP Volume Mount Point: Specify the location on the file system where the NCP
volume will reside if NCP support is enabled.
advanced settings. To proceed with the installation, click Next.
available software page. eDirectory is now listed on the installed software list.
All in the Add/Remove panel, then click Install in the eDirectory panel.
Tree Name: Specify the name of your existing eDirectory tree.
IP Address: Specify the IP address of the server that is already hosting the tree.
your password.
Admin Password: Password of the eDirectory administrator user.
Admin Password Confirm Retype the password for the eDirectory administrator user.
SBS Admin Username: The username for the SBS administration user.
SBS Admin Password: The password for the SBS administrator user.
SBS Admin Password Confirm: Retype the password for the SBS administrator user.
server name.
LDAP Port: Specify the TCP port number on the LDAP server, such as 389. Fill in the
field only if you know the correct information; otherwise, leave it blank.
Secure LDAP Port: Specify the secure port number on the LDAP server, such as 636.
Fill in the field only if you know the correct information; otherwise, leave it blank.
advanced settings. To proceed with the installation, click Next.
available software page. eDirectory is now listed on the installed software list.