Getting Started; Starting And Logging In To The Vm Client Interface; Starting The Interface On A Windows Workstation - Novell PLATESPIN ORCHESTRATE 2.0.2 - VM CLIENT GUIDE AND REFERENCE 06-17-2009 Client Manual

Getting Started

2
To get started with the PlateSpin
Section 2.1, "Starting and Logging In to the VM Client Interface," on page 15
Section 2.2, "Logging In to Another Virtualization Grid," on page 19
Section 2.3, "Registering VM Hosts," on page 20
Section 2.4, "Discovering Registered VM Hosts," on page 21
Section 2.5, "Discovering VMs of the Registered VM Hosts," on page 22
Section 2.6, "Registering VMs," on page 22
2.1 Starting and Logging In to the VM Client
Interface
You can run the VM Client on both Windows and Linux workstations:
Section 2.1.1, "Starting the Interface on a Windows Workstation," on page 15
Section 2.1.2, "Starting the Interface on a Linux Workstation," on page 17

2.1.1 Starting the Interface on a Windows Workstation

1 On your Windows workstation, double-click the PlateSpin Orchestrate VM Client icon ( ) on
your desktop to open the interface.
If you do not have the icon, the executable's location is determined by where you installed the
VM Client software. The default is
Client 2.0.2\bin\vmclient.bat
For information on multiple VM operators logging in to the VM Client, see
"Multiple VM Operator Logins," on page
®
Orchestrate VM Client, do the following:
C:\Program Files\PlateSpin Orchestrate VM
.
31.
Section 3.2.1,
Getting Started
2
15