Novell BUSINESS CONTINUITY CLUSTERING 1.2.1 - ADMINISTRATION Administration Manual page 91

Parameter Description
Namespace If you selected the CIM Client check box on the previous page, accept the
default namespace, or specify a different namespace for your storage
system.
Namespace determines which models and classes are used with your
storage system. Consult the vendor documentation to determine which
namespace is required for your storage system.
Username and If you selected the CIM Client check box on the previous page, accept the
password default namespace, or specify a different namespace for your storage
system.
Port If you selected the CIM Client check box on the previous page, accept the
default port number or specify a different port number. This is the port
number that CIMOM (your storage system manager) uses. Consult your
storage system documentation to determine which port number you should
use.
Secure If you selected the CIM Client check box on the previous page, select the
Secure check box if you want storage management communication to be
secure (HTTPS). Deselect the Secure check box to use non-secure
communications (HTTP) for storage management communications.
Script If desired, specify variables and values for the variables that are used in
parameters the storage management script.
To specify a variable, click New, then provide the variable name and value
in the fields provided. Click OK to save your entries. You can specify
additional variables by clicking New again and providing variable names
and values. You can also edit and delete existing script parameters by
clicking the applicable link.
Script Use this text box to add script commands to the script you are creating.
parameters text
These script commands are specific to your storage hardware. You can
box
add a Perl script, or any commands that can be run on Linux.
IMPORTANT: If you add commands to call outside scripts, those scripts
must exist with the same name and path on every server in the cluster.
CIM enabled Select this check box if your storage system supports SMI-S and you did
not select the CIM Client check box on the previous page. This causes the
CIM-specific fields to become active on this page.
Synchronous Select this check box to run scripts sequentially (that is, one at a time).
Deselect this check box to allow multiple scripts to run concurrently. Most
storage system vendors do not support running multiple scripts
concurrently.
Edit flags This is an advanced feature, and should not be used except under the
direction of Novell Support.
7c Click Apply and OK on the Script Details page, then click OK on the Resource Properties
page to save your script changes.
Configuring BCC for Peer Clusters 91