Adding Peer Cluster Credentials; Using Console Commands To Add Credentials - Novell BUSINESS CONTINUITY CLUSTERING 1.2.1 - ADMINISTRATION Administration Manual

3c For each driver, click the upper right corner of the driver icon to see if a driver is started or
stopped.
3d If the driver is stopped, start it by selecting Start.
4 In Roles and Tasks, click Clusters, then click the Cluster Options link.
5 Specify a cluster name, or browse and select one.
6 Click the Properties button, then click the Business Continuity tab.
7 Select the Enable Business Continuity Features check box.
8 Repeat
cluster.
9 Wait for the BCC Identity Manager drivers to synchronize.
You can use the
synchronized when all of the peer clusters are present in the list.
10 Continue with

10.2 Adding Peer Cluster Credentials

Clusters must be able to authenticate to themselves and to peer clusters. In order for one cluster to
connect to a second cluster, the first cluster must be able to authenticate to the second cluster. For
each node, add the authentication credentials (username and password) of the user who the selected
cluster will use to authenticate to a selected peer cluster.
IMPORTANT: In order to add or change peer cluster credentials, you must access iManager on a
server that is in the same eDirectory tree as the cluster for which you are adding or changing peer
credentials.
Section 10.2.1, "Using Console Commands to Add Credentials," on page 86
Section 10.2.2, "Using iManager to Add Credentials," on page 87

10.2.1 Using Console Commands to Add Credentials

To add peer cluster credentials, do the following for each node of every cluster in the business
continuity cluster:
1 Open a terminal console on the cluster node where you want to add peer credentials, then log in
as the
2 At the terminal console prompt, enter
cluster connections
3 Verify that all clusters are present in the list.
If the clusters are not present, the Identity Manager drivers are not synchronized.
If synchronization is in progress, wait for it to complete, then try
again.
If you need to synchronize, see
4 For each cluster in the list, enter the following command at the server console prompt, then
enter the
cluster credentials cluster_name
86 BCC 1.2.1: Administration Guide for OES 2 SP2 Linux
Step 1 through Step 7 for each cluster that you want to add to the business continuity
cluster connections
Adding Peer Cluster
user.
root
username and password when prompted.
bccadmin
command to list the clusters. The drivers are
Credentials.
"Synchronizing Identity Manager Drivers" on page
cluster connections
81.