Installing The Bcc Identity Manager Templates - Novell BUSINESS CONTINUITY CLUSTERING 1.2.1 - ADMINISTRATION Administration Manual

8 Specify the Directory Server Address by selecting the IP addresses of the master eDirectory
server and the local server.
9 Accept or change the eDirectory Administrator user name and specify the Administrator user's
password.
10 Click Next.
11 Review your setup on the Novell Business Continuity Clustering Configuration Summary
page, then click Next to install the BCC software.
12 Click Finish to save the BCC configuration and exit the tool.
13 Verify that the BCC software is running on the server by entering the following at a terminal
console prompt:
rcnovell-bcc status
14 Continue with

4.4.3 Installing the BCC Identity Manager Templates

The Identity Manager management templates for Business Continuity Clustering consist of XML
templates for the eDirectory driver that are used for synchronizing objects between peer clusters.
The templates are required to configure your business continuity cluster. You must have previously
installed iManager on the server where you plan to install the templates.
You should install the management templates on the same server where you installed the Identity
Manager Management utilities. For information, see
Edition," on page
IMPORTANT: If you have not already done so, install the BCC RPMs on this server as described
in Section 4.4.1, "Installing the Business Continuity Clustering RPMs," on page
Perform the following tasks on the iManager server in each tree that belongs to the business
continuity cluster:
1 Log in as the
2 Use one of the following methods to open the BCC Configuration page:
In YaST, select Miscellaneous > Novell-BCC.
At a terminal console prompt, enter
yast2 novell-bcc
3 When prompted, deselect the Install Core Business Continuity Clustering Software and
Configure Core Software option and select the Install Identity Manager Templates option, then
click Next.
Selecting the Install Identity Manager Templates option installs the iManager plug-ins on this
Linux server.
52 BCC 1.2.1: Administration Guide for OES 2 SP2 Linux
Section 4.4.3, "Installing the BCC Identity Manager Templates," on page
42.
user on the server.
root
Section 4.1.7, "Identity Manager 3.6.1 Bundle
52.
50.