Changing The Ncs: Bcc Settings Attributes In The Bcc Xml Configuration - Novell BUSINESS CONTINUITY CLUSTERING 1.2.1 - ADMINISTRATION Administration Manual

Configuration Setting
BCC Administrator
group
Peer cluster CIMOM
URL (same as the Inter-
cluster communication
scheme)
14.2.2 Changing the NCS: BCC Settings Attributes in the BCC
XML Configuration
WARNING: You should not change the configuration settings for the NCS:BCC Settings attribute
unless instructed to do so by Novell Support. Doing so can have adverse affects on your cluster
nodes and BCC.
The following XML for the NCS:BCC Settings attribute is saved on the local Cluster object in
eDirectory. The BCC must be restarted for changes to these settings to take effect. These are
advanced settings that are intentionally not exposed in the BCC plug-in for iManager.
<bccSettings>
<adminGroupName>bccgroup</adminGroupName>
<authorizationCacheTTL>300</authorizationCacheTTL>
<cimConnectTimeout>15</cimConnectTimeout>
<cimReceiveTimeout>30</cimReceiveTimeout>
<cimSendTimeout>30</cimSendTimeout>
<idlePriorityThreshold>3</idlePriorityThreshold>
<initialNormalThreads>3</initialNormalThreads>
<initialPriorityThreads>2</initialPriorityThreads>
<ipcResponseTimeout>15</ipcResponseTimeout>
<maximumPriorityThreads>20</maximumPriorityThreads>
<minimumPriorityThreads>2</minimumPriorityThreads>
<resourceOfflineTimeout>300</resourceOfflineTimeout>
<resourceOnlineTimeout>300</resourceOnlineTimeout>
<scanForNewDevicesDelay>5</scanForNewDevicesDelay>
</bccSettings>
On Linux, the above XML is written to
IMPORTANT: This file might be overwritten by Business Continuity Clustering at any time.
Therefore, any changes to this file on Linux are ignored and lost. All changes should be made in
eDirectory.
Possible Values
Any LUM-enabled
eDirectory group
http://cluster_ip_address
cluster_ip_address
where https:// is
assumed.
/etc/opt/novell/bcc/bccsettings.xml
Default Value
bccgroup
cluster_ip_address
https:// is assumed.
Recommended Value for
Best Security
Unique group used for
BCC administration.
See Section 4.3,
"Configuring a BCC
Administrator User and
Group," on page 48.
Default value
file.
Security Considerations 127