Novell BUSINESS CONTINUITY CLUSTERING 1.2.1 - ADMINISTRATION Administration Manual page 162

6 Specify the following settings for the script:
Parameter
CIM-Enabled
Name
Description
CIMOM IP/DNS
Namespace
Port
Secure
Username
162 BCC 1.2.1: Administration Guide for OES 2 SP2 Linux
Description
Used for CIM (Common Information Model) and SMI-S (Storage
Management Initiative Specification) enabled scripts that manage a
physical SAN. These are not used for the dynamic DNS script.
Deselect the check box. After this check box is deselected, the CIMON IP/
DNS, Namespace, Port, Secure, Username, and Password controls are
all disabled.
Specify the name of the script that is shown in the BCC log files (such as
in ). The name should give enough information that
/var/log/messages
the entries in the log file are meaningful.
For example, a name of Dynamic DNS Update – Resource Test1
identifies what the script does and which resource it is acting upon.
Specify information that helps you understand the nature of the script. This
information is not displayed in any of the BCC log files.
This field is used by CIM or SMI-S enabled scripts. It is not needed for the
dynamic DNS script.
This field is used by CIM or SMI-S enabled scripts. It is not needed for the
dynamic DNS script.
This field is used by CIM or SMI-S enabled scripts. This field is not needed
for the dynamic DNS script.
This field is used by CIM or SMI-S enabled scripts. This field is not needed
for the dynamic DNS script.
This field is used by CIM or SMI-S enabled scripts. This field is not needed
for the dynamic DNS script.